i-tec C31QUATTRODOCKPD Mode D'emploi page 19

Audio
Audio output devices, for listening through graphic output, need to be set /
verified here: System Preferences-Sound-Output – select USB Audio Device.
Setting the audio output device to both the earphones and the monitor
simultaneously can be done in Open-Applications-Utilities-Audio settings
MIDI.app – click on „+" on the left at the bottom – Create device with multiple
outputs and select the desired outputs from the offered options on the Device
with multiple outputs.
Note: The majority of problems with the docking station and the connected
peripheral devices can be solved by turning the docking station off and turning
on after approximately 10 s.
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and falling
to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user
manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this product.
Manual EN
19