Installation; Considerations Before Installing Hood - Thermador Professional Série Manuel D'installation

Installation

Considerations Before Installing Hood

NOTE: Do not throw away any packaging until appliance is fully installed.
Parts Included
(1) Metal Transition with backdraft
damper
(2, 3, or 4 depending on model and size)
Stainless steel baffle filters
(2) Side panels
(1) Grease tray
(1) Remote blower adaptor
(2) 175W Heat lamps (on some models)
Halogen bulbs, installed
(1) Wooden bracket used for Hood
Mounting Bracket (part of install- do not
throw away)
(1) Fastener assortment
Use & Care Manual, Installation Instructions, and
Registration Card
English 4
Parts Not Included
Aluminum tape (DO NOT use duct tape)
1/2" (13mm) Conduit (if required, follow local codes)
Strain Relief
Blower
Optional duct cover accessory is available for separate
purchase. Refer to www.thermador.com for more details.
Optional Keep Hot Shelf accessory is available for
separate purchase. Refer to www.thermador.com for
more details.
Optional Backsplash accessory is available for separate
purchase. Refer to www.thermador.com for more details.
Tools Required
Flat head and phillips
screwdrivers
Drill
3/8" (9.52mm) nut driver or
socket and ratchet
Wire stripper
3/16" (4.76mm) drill bit
Protective work gloves