INNOBIZ Nelia fujin Notice D'emploi page 10

Tips for use :
Assembly :
Carefully insert the glass fl ask (n°.2) into the plastic base (n°.1). * To facilitate handling,
perform slight rotations in the insertion axis. Then place the elastomer seal (n°. 3) around the
base of the cap (n°. 4), then this set on the glassware. Finally, connect the adapter to the mains
socket (220-240V). WARNING: before inserting or removing the glass fl ask (n°.2) make sure
you have removed the rotatable nozzle (n°.4) to avoid any risk of breaking. The blown glass
parts are very fragile.
10
4
3
2
1 1
EN