Status Messages / Leds; Organise Products In Hi-O Groups - Assa Abloy Hi-O Technology One Systems N5950 Notice D'installation Et De Montage

Fig. 2 :
LEDs on housing cover
Inputs and outputs

Status messages / LEDs

LEDs (Fig. 2) are used to display the statuses of the inputs and outputs (relays).
LED
1 : Input
2 : Relay (output)
In addition, the operational availability is displayed using three LEDs.
LED 1 LED 2 Status of the IO module
(red) (green)
– illumi- IO module is online and ready for operation
nated
flashing flashing IO module is offline or starting up
(the automatic initialisation is running)
1
External unlocking
External door contact
Central locking

Organise products in Hi-O groups

The Hi-O Technology™ products are assigned to two Hi-O groups via DIP switches. The products' digital
communication is always conducted exclusively within the assigned Hi-O groups.
For instance, the locks of a double-leaf door with separate monitoring of the active and inactive leaf can be
controlled separately via two separate IO modules. One lock forms Hi-O group 0 with its IO module, while
the other one forms Hi-O group 1 with its IO module ("DIP switch", page 46, and Fig. 8).
Meaning
illuminated It input is closed against GND
illuminated The relay is activated / active
2
Handle outside
Fire alarm
Handle inside
Key cylinder contact
Clutch monitoring
Door operator
Unlocked
Locked
Door closed
Alarm / Fault
LED 1 LED 2
Status
no USB
D00852
N5 95 0
EN
43