Inputs And Outputs; Assignment Of Inputs And Outputs - Assa Abloy Hi-O Technology One Systems N5950 Notice D'installation Et De Montage

A
Fig. 1 :
Connections to the base
circuit board
EN
38

Inputs and outputs

Assignment of inputs and outputs

The IO module has up to eight digital, non-isolated inputs and eight isolated relay outputs with change-
over contacts. (Fig. 1).
At tention!
Danger of destruction if inputs are triggered non-isolated: the digital inputs may only be triggered by
isolated contacts (release button, relay contact).
The function of the inputs and outputs is preconfigured for the use of OneSystem
DIP switch 4 (Fig. 1) is used to set whether a coupling lock (or lock with monitoring function) or mo-
torised lock ("DIP switch", page 46) is to be controlled. This results in different functions of the outputs.
Outputs
23 24 25 26 27 28
(relays)
R8
off = coupling lock (or lock with monitoring function)
on = motorised lock
Inputs
1 2 3
Hi-O Technology™
bus
29 30 31 32 33 34
R7 R6 R5
E1 E1 E2 E2 E3 E3
4
5 6 7 8 9 10 7 8 9 10 11 12 13 14 11 12 13 14
Digital inputs – only potential-free control
Input B – Fire alarm system – non-isolated
signal required (12 V DC – 24 V DC)
® locks (Tab. 1).
35 36 37 38 39 40 41 42 43 44 45 46
R4 R3 R2
DIP
8 7 6 5 43 2 1
E4 E4 E5 E5 E6 E6 E7 E7
15 16 17 18 15 16 17 18 19 20 21 22 19 20 21 22
R1
off
on
E8 E8
Inputs and outputs