Attaching Brackets And Mounting Terminal - Mettler Toledo IND246 Guide D'installation

2.3.3.

Attaching Brackets and Mounting Terminal

2-8 METTLER TOLEDO IND246 and IND246 POWERCELL Installation Manual
6. Attach the spare white plastic anchor from the spare parts kit to the inside left wall of the
terminal. Reattach the AC power line.
1. Once the enclosure is closed, use the four screws to attach the brackets to the bottom of the
terminal, as shown in Figure 2-12.
Figure 2-12: Attaching the Wall-Mounting Bracket
2. Mark the position of the bracket mounting holes on the surface to which the terminal will be
mounted per the dimensions shown in Figure 2-13, or by holding the terminal up to the
surface and marking through the bracket holes.
Figure 2-11: Housing Reversed
Housing, rotated
Power wire relocated
Ground straps/hinges reconnected
64084463 | 02 | 12/2013