Siemens MK3 Serie Mode D'emploi page 15

Explanation of the symbols on the appliance or accessory
W
Caution! Rotating tools.
Do not place fingers in the feed tube.
o
Lock blade insert in the blender or universal cutter jug.
n
Remove blade insert from the blender or universal cutter jug.
p
Blade insert with blender/cutting blade
q
Blade insert with grinding blade
Congratulations on the purchase of your
new Siemens appliance. You can find
further information about our products
on our website.
Contents
For your safety ........................................... 13
Overview .................................................... 15
Operation ................................................... 16
Cleaning and servicing . .............................. 18
Troubleshooting ......................................... 19
Storage . ...................................................... 19
Disposal...................................................... 19
Guarantee .................................................. 19
Recipes / Ingredients / Processing ........... 20
Overview
The instructions describe different features of
the appliance. Figure I shows an overview
of the model.
Please fold out the illustrated pages.
Fig. A
Base unit
1 Rotary switch
P = Stop
M = Instantaneous switching at
maximum speed, hold switch for required
blending duration.
Settings 1-2, Operating speed:
1 = low speed - slow,
2 = high speed - fast.
2 Drive
MK3_EU_8001024969.indb 15
3 Cord store
4 Bowl
5 Tool holder
6 Tools*
a Universal blade with blade guard
b Kneading hook
c Chopping disc
7 Cutting discs*
a Slicing reversible disc - thick/thin
b Shredding reversible disc -
coarse/fine
c Reversible slicing/shredding disc
8 Lid
a Filler opening
b Pusher
Accessories*
9 Blade insert with blender/cutting
blade and seal
10 Blade insert with grinding blade and
seal
11 Universal cutter jug
12 Blender jug
13 Lid for blender
a Filler opening
b Funnel-shaped stopper
* for some models:
With the universal cutter use the appliance at
full power (according to the recipe). You can
find the recipe on the illustrated pages
(Fig. F).
If the universal cutter is not included with
the hand blender, it can be ordered from
customer service (order no. 12005833).
For your safety en
15
02.10.2015 14:16:05