Komet NikiVac Notice D'utilisation page 45

Maintenance and Troubleshooting
8.2 Cleaning the Machine
Danger!
Electric shock possible!

Pull out the mains power plug before starting work!

Do not use a high pressure cleaner or steam ejector for cleaning.

If you remove the sealing pad for cleaning, protect the sealing
cylinder against humidity.
Danger!
Danger of fire when using disinfectants containing alcohol!

Ensure sufficient ventilation.

Do not use any open flames close to the machine.

Do not smoke.
Warning!
Risk of injury!

Wear protective glasses and protective gloves when carrying out
cleaning work!

Do not use a caustic solution or any aggressive cleaning agents,
such as vinegar, for example.

Only use a suitable cleaning agent for Plexiglas when cleaning the
cover (e.g. Crystal Clear from the company Hilco).

Observe the safety instructions on the cleaning agents and
disinfectants.
Note!

If necessary, use an alcohol-based disinfectant (e.g. isopropyl
alcohol).
Operating Instructions - Translation
Note!
The vacuum chamber is soi
If you switch off the machine
the main switch, e.g. in orde
might occur that oil from the

Do not switch off the ma
the packaging process.

Unhook the gas spring i
Cleaning the Plexiglas cover:

Wipe with clean water or a suitabl
maximum of 40°C).

Do not use any other cleaning age

Re-rinse with clean water

Dry the cover properly.
Cleaning the machine:

Remove all coarse pieces of wast

If you remove the sealing pad for c
humidity.

Only clean the device with a neutr
maximum of 40°C).

Wipe down with damp cloth and c

Properly dry the vacuum chamber
Disinfecting the machine (if necess

Spray the machine with an alcoho

Allow the disinfectant to act for a s

Re-rinse with clean water.

Dry the machine properly.