Komet NikiVac Notice D'utilisation page 44

Maintenance and Troubleshooting
8.1 Maintenance
Carry out maintenance work according to the following table.
Arrange for any faults to be repaired by a skilled technician or by your dealer:
When Where
Immediately Exhaust filter splashed or
soaked with oil (can promote
smoke)
Plexiglas cover
Area under the sealing bar
(brass contact surface)
Cable
Before starting
operation
Vacuum chamber
Silicon rubber
Cover gasket
Sealing bar and cylinder
(piston rod)
Operating Instructions - Translation
What to do ?
- Replace the exhaust filter
element
- Replace if cover shows signs
of cracks, hairline cracks,
deep scratches or any other
damage
If there is a deterioration in seal
seam quality
- Clean
- Replace if damaged
- Clean
Teflon band
- Clean
- Replace if damaged
- Check for easy movement
- Where necessary, lubricate
(lubricant: sewing machine
oil)
When Where
Area under the seal
Weekly
(brass contact surfa
Sealing cylinder pist
Complete machine
Oil level display –
right-hand side of m
Pump
After 6 months
Once a year Exhaust filter