Komet NikiVac Notice D'utilisation page 42

Operation

Important!
Folds and contaminated openings of bags prevent a perfect seal.

Keep the opening of the bag clean.

Pull the bag smoothly over the sealing pad.

Close the cover.

The vacuum procedure takes place automatically.

If desired: abort the vacuum procedure (vacuum stop) by
pressing the VAC STOP button.
Important!
If you note the formation of bubbles during evacuation:

immediately press the VAC-STOP button (vacuum stop function).

set the evacuation time for the next evacuation procedure so that
no more vaporisation occurs.

The sealing procedure takes place automatically.
Operating Instructions - Translation
Lay the filled vacuum bag in the chamber.
The type of seal depen
Double sealing is stand
A separating seal (cut-
doing the projecting len
length of the bag can th

The cover opens automatically wh

Remove the packaged good.

Check the quality of the seal.
Important!
Quality of the seal:
clear:
thin and lacerated:
opaque and blistered:

The machine is once again ready

When the work is finished, switch
(setting 0).
Important!

Wait about 5 seconds a
machine back on again
operate correctly.