Dangers Caused By Electric Power; Servicing, Maintenance, Fault Repair; Structural Modifications To The Machine; Fire Protective Measures - Komet NikiVac Notice D'utilisation

General Safety Instructions
3.4

Dangers caused by electric power


Only have work carried out on the electric power supply by a licensed electrical
engineer.

Regularly check the electrical equipment on the machine.

Immediately remove any loose connections or scorched cable.(only by licensed
electrical engineer.

Only use mains plugs, which are authorised for the voltage power supply specified
on the type label. In case of doubt, please consult your dealer or the local Electric
Utility Co.

Do not insert any objects into the ventilation slots of the machine. There is a
danger of electric shock.

Spraying water and steam jets in the operating site is forbidden. There is a danger
of electric shock.
3.5

Servicing, maintenance, fault repair


Pull out the mains power plug when undertaking any of the above mentioned work.

Carry out the prescribed setting, servicing and inspections according to specified
schedule.

Have any faults repaired by a skilled technician or by your dealer.
3.6

Structural modifications to the machine


Do not undertake any modifications, add-on work or conversions to the machine
without the manufacturer's approval.

Immediately exchange machine components, which are not fully functional.

Only use original spare parts or consumables.
Operating Instructions - Translation
3.7

Fire protective measures


Keep the ventilation slots free (a d

Do not place the machine close to
3.8 Cleaning the machine and

Properly handle and dispose of us
3.9

Sound level


The continuous sound pressure le
than 70 dB (A).
3.10 Dangers resulting from the

Under no circumstances should yo
have an extremely high internal pr

Prior to disposal the pneumatic sp
our disposal instructions!