Overview; Special Product Features - Metabo BHE 20 SP Mode D'emploi

17026895_0308 BHE_Gu incl RU.book Seite 12 Montag, 31. März 2008 8:58 08
ENGLISH
ENG
wiring or its own cord. Cutting accessory
contacting a "live" wire may also energise metal
parts of the power tool, resulting in an electric
shock.
Always hold the machine with both hands using the
handles provided, stand securely and concentrate.
Always wear protective goggles, gloves, and sturdy
shoes when working with this tool.
Ensure that the spot where you wish to work is
free of power cables, gas lines or water pipes
(e.g. using a metal detector).
Metabo S-automatic safety clutch.
When the safety clutch responds, switch off the
machine immediately!
Avoid inadvertent starts by always unlocking the
switch when the plug is removed from the mains
socket or in case of a power cut. Not required for
drills with VTC electronics (restart protection).
Do not touch the rotating tool!
Remove chips and similar material only with the
machine at standstill.
Caution must be exercised when driving screws
into hard materials (driving screws with metric or
imperial threads into steel)! The screw head may
break or a high reverse torque may build up on the
handle.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
SYMBOLS ON THE TOOL:
.......Class II Construction
V...........volts
A...........amperes
Hz.........hertz
.../min ...revolutions per minute
~...........alternating current
n .........no load speed
0
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chromate,
wood preservative). Material containing asbestos
must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is recom-
mended.
Follow national requirements for the materials you
want to work with.
12

5 Overview

See page 3 (please unfold).
1 Keyless chuck
2 SDS chuck
3 Tool lock
4 Keyless chuck sleeve
5 Chuck lock
6 Spindle
7 Depth stop
8 Speed preselection wheel
9 Electronic signal indicator
10 Contact mode indicator
11 Contact mode
12 Rotation selector switch
13 Lock button
14 Trigger
15 Stop
16 Control knob
17 Side handle
18 SDS chuck

6 Special Product Features

Exchangeable chuck
(not KHE 22 SP, KHE 24 SP, KHE 26 SP, BHE 22,
BHE 20 SP):
With a simple operation and without the need for
extra tools the SDS chuck is exchanged against the
keyless chuck.
Single-knob control
With only a single control knob the operating mode
(drilling, hammer drilling, chiselling, depending on
the model) is selected.
Rotary stop:
(KHE 28, KHE 26 Contact, KHE 26, KHE 26 SP,
KHE 22 SP, KHE 24 SP, KHE Partner Edition):
By turning the rotation off chiselling can be done.
Metabo S-automatic safety clutch:
If the insertion tool jams or hooks, the power flow to
the engine will be restricted. Because of the high
power which then arises, always hold the machine
with both hands on the handles, stand safely, and
concentrate on your work.
Auto-stop carbon brushes
If the brushes are completely worn, the machine
switches off automatically.
With VTC electronics: A LED warns before the
brushes are completely worn.
Restart protection on machines with
VTC electronics
(KHE 28, KHE 26, BHE 26, KHE 26 SP,
KHE Partner Edition)
The restart protection prevents unintentional
starting when being plugged in again or when
power is restored after a power failure.