English - i-tec CHARGER80W Mode D'emploi

Universal Charger USB-C / 3.0 + Power Delivery
INTRODUCTION
By using this adapter, you can charge up to five devices at the same time, with a
maximum power of 80 W. Four devices can be charged via the USB-A Qualcomm Quick
Charge 3.0 outputs and one device via the USB-C Power Delivery 2.0 output.
The Qualcomm Quick Charge 3.0 output has an output voltage in the range of DC 3.6-20V /
max. 3.5 A. These outputs allow many uses at home, in business centres as well as in
the office. You can charge mobile phones, tablets, GPS navigations, powerbanks, music
players, e-book readers, cameras, Nintendo Joy-Con, Nintendo Switch Pro Controllers
and other digital devices.
One big feature of the USB-A Qualcomm Quick Charge 3.0 output is that it can quick-
charge mobile phones that support this feature. Quick Charge 3.0 can charge your
mobile phone from 0 % to 80 % in just 35 minutes, which is four times faster than normal
charging. Quick Charge 3.0 is also backward compatible with 2.0 and 1.0 in case your
mobile phone supports one of these older versions.
This universal USB-C 60 W power adapter is a great choice for powering any laptop or
other device equipped with a USB-C connector that supports USB-C Power Delivery, with
a maximum power demand of 60 W. The voltage is set automatically according to the
USB Power Delivery specification 2.0 in the individual profiles in the following steps: 5V /
9V / 12V / 15V / 19V / 20V, with max. 3 A current consumption.
The input voltage of AC 100-240V allows worldwide use.
The adapter is also suitable for charging the Nintendo Switch. You can charge the
console itself via the USB-C connector, but you can also charge Nintendo Joy-Con and
Nintendo Switch Pro Controllers via the USB-A connectors.
SPECIFICATIONS
• Input voltage: AC 100-240V, 50-60Hz, max. 1.8A
• Total output power: max. 80W (USB-C PD 2.0: max. 60W; Quick Charge 3.0: max. 70W)
• USB-C PD 2.0 output voltage: DC 5-20 V (automatic detection)
• USB-C PD 2.0 output current: max. 3 A
• Quick Charge output voltage: DC 3.6-20V (automatic detection)
• Quick Charge output current: max. 3,5A
• Protection against: current overload, overvoltage, short circuit and overheating.
• Idle consumption: ≤ 0.4 W
• Operating values: 0°C – 40°C
• Relative humidity: 20% - 80%
• Product dimensions: 110 x 98 x 20 mm
• Product weight: 238 g
PACKAGE CONTENT
• i-tec USB Universal Charger 80W
• AC Power Cable (150 cm)
• USB-C power supply cable (100 cm)
• User manual
USING THE POWER ADAPTER
Connecting the universal adapter to the device:
• Plug the adapter into the power outlet using the supplied power cord (make sure
that the plug is inserted properly in the adapter) and then you can connect various
digital devices using the 4x USB- A Qualcomm Quick Charge 3.0 and 1x USB-C PD 2.0
output.
• When you want to charge your USB-C device, plug the USB-C cable into the adapter
and connect the other end of the USB-C cable to your laptop, mobile phone, Nintendo
Switch or other digital device.
4 |

ENGLISH