Display Settings - PURE Siesta Home Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48
Changing the equaliser
1. Press Menu.
2. Press
3. Press
4. Press
Changing the audio settings
1. Press Menu.
2. Press
3. Press
4. Press

Display settings

You can change the display brightness and the information that is displayed on the screen when you
are listening to the radio or playing music.
Changing the display brightness
Note: Display brightness settings also apply to backlight of the buttons.
1. Press Menu.
2. Press
3. Press
4. Press
5. Press
BRIGHTNESS Choose the automatic brightness level or set the brightness level manually.
DURATION
Changing the information on the display
The information displayed on the active screen is configured separately for Digital radio, FM radio and
CD.
You can't change the information displayed on the active screen for Bluetooth because the Bluetooth
module doesn't support fetching of information about tracks. The idle Bluetooth screen shows BT
CONNECTED or BT NOT CONNECTED.
To change the information on the display:
1. Press Source to choose the source you want to configure.
2. Press Menu.
3. Press
4. Press
5. Press
6. Press
18
until AUDIO EQ is displayed and then press Select.
or
or
until EQ is displayed and then press Select.
or
to change the equaliser and then press Select.
or
until AUDIO EQ is displayed and then press Select.
or
until TONE is displayed and then press Select.
or
to change the treble and bass settings. Press Select to choose a setting.
or
until DISPLAY is displayed and then press Select.
or
until BACKLIGHT is displayed and then press Select.
or
until ACTIVE or STANDBY is displayed and then press Select.
or
to change the settings. Press Select to choose a setting.
To make your screen brighter, choose a higher number.
Choose to keep the screen lit up all the time or to time out after 10 seconds.
or
until DISPLAY is displayed and then press Select.
or
until INFORMATION is displayed and then press Select.
or
until ACTIVE or STANDBY is displayed and then press Select.
or
to change the settings. Press Select to choose a setting..

Publicité

Table des Matières
loading

Table des Matières