Tectro TP 20 Manuel D'utilisation page 47

ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• Never seal the room - where this device will be used - completely
airtight. This will prevent under pressure in this room. Under
pressure can disrupt the safe operation of geysers, ventilation
systems, ovens, etc.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
B
INSTALLATION
WARNING
Before using the air conditioner it should be left in an upright position
for at least 2 hours.
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
Ensure that the unit is positioned upright and on a level surface.
1
Do not operate the unit inside the bathroom, shower, or in any other very
2
humid environment.
Please keep a distance of 50 cm between the unit and the wall or other
3
objects to ensure proper air circulation.
Insert both ends of the air exhaust hose µ in the round connectors
4
the connectors by turning them clockwise onto the hose.
Insert one round connector
5
to the window air outlet ¸.
connector
Ensure that the window air outlet ¸ has a free flow outside. Close the
6
window or door as much as possible to prevent outside air from entering the
room.
IMPORTANT
The flexible exhaust hose can be extended from 600 to 1500 mm for
mounting. This length has been designed especially according to the
specifications of the air conditioner. Do not use an extension or
exchange for a different hose as that may lead to malfunctioning. The
exhaust air must flow freely, any blockage can lead to overheating of
the air conditioner. Take care to prevent any bow or bend in the exhaust
hose.
in the backside of the unit
. Fasten
. Fasten the other
4
47