ULTIMATE SPEED ULGD 5.0 C1 Traduction Du Mode D'emploi D'origine page 23

Program 3
To charge 12 V batteries with a capacity of
14 Ah – 120 Ah.
Press the program selector button
The symbol
charging process, the charging display
shows how far the charging process has progressed (1 – 4
bars). When the battery is fully charged, the status display
shows 4 bars. The flashing stops and the device
9
switches to trickle charging automatically.
Program 4
To charge 12 V batteries with a capacity of
14 Ah – 120 Ah under cold conditions or to charge AGM
batteries.
Press the program selector button
Note:
This program starts, with a slight time delay if necessary.
The symbol
charging process, the charging display
shows how far the charging process has progressed
(1 – 4 bars). When the battery is fully charged, the status
display shows 4 bars. The flashing stops and the device
9
switches to trickle charging automatically.
Trickle charging
As described in "Selecting programs", the device has an
automatic trickle charging procedure. Depending on the
drop in voltage in the battery – through self-discharge –
the charger reacts with different levels of charging current.
The battery can remain connected to the charger over a
longer period of time.
, "12 V", (14.4 V / 5.0 A)
is shown in the LC display. During the
5
, "12 V", (14.7 V / 5.0 A)
is shown in the LC display. During the
6
GB/IE/NI/CY/MT
Using the device
to select Program 3.
11
flashes and
8
to select Program 4.
11
flashes and
8
23