Publicité
Ecofan
UltrAir Operating Instructions
®
®
The Ecofan
UltrAir is designed to be used on freestanding wood stoves with normal
surface temperatures of 150°F - 650°F (65°C- 345°C). Temperatures above 650°F
(345°C) may damage your Ecofan
stove if the surface temperature exceeds 650°F (345°C). Good wood stove safety
practice includes using a stove thermometer.
(Ensure handle is upright before
Thermoelectric Module
*DANGER: When in use the base is hot. DO NOT TOUCH!
Getting the Most From Your Ecofan
For optimum performance, placement on the stove's
surface is critical. Be sure to position the Ecofan
UltrAir on the stovetop so that cool air will be
drawn over the cooling fi ns. The Ecofan
be used directly in front of the stove pipe or at the
front of the stove.
NOTE: Overheating will reduce the Ecofan
effectiveness and may damage the thermoelectric
module and void the warranty. Remove the Ecofan
from stove if temperature exceeds 650°F (345°C).
®
Hold Here
placing on stove.)
Cooling Fins
Base*
. Relocate your Ecofan
®
®
®
should not
®
's
®
®
to a cooler spot on your
Publicité
