Installation
The ventilation slots (grill) may not be covered (minimum distance from other
attachment parts: 10 cm).
You can connect the unit to the battery via the lorry's terminal block or
directly. The terminal block is to be preferred for the connection. On some
vehicles, larger consumers connected to the terminal block are switched off
after a short while if the power requirement is too high. Ask your vehicle
manufacturer for the specifications of the terminal block.
When installing the system and making the electrical connections, observe
the guidelines from the body manufacturer.
Pay attention to the connection plan for the device:
RT780
No. in
fig. 5
10
Designation
1
Control pad
2
Connection cable
3
Room temperature sensor
4
Earth
5
Klickson (compressor)
6
Compressor
7
Condenser fan
8
Vaporiser fan
9
Earth
10
25 A fuse
11
2 A fuse
12
4 A fuse
CoolAir RT780, SP950T
EN