Quick Reference - Honeywell HVC0001 Guide Du Propriétaire

Quick reference

Programmable modes
The bath fan is On
Press the Main Button to turn the
bath fan On or Off. (Press for 3
seconds to enter the setup menus.)
If the controller is also used to control
lights, pull out this safety tab before
replacing the light bulb. Push back in
after the light bulb is replaced.
Clock
Setup menu
Countdown Mode
(see page 17)
Countdown time
The bath fan is Off
Press either button to place in
Countdown Mode. Then press the
left button to decrease the
countdown time or the right button
to increase the time.
The LED illuminates
when the bath fan is On.
3
HVC0001/HVC0002