About Your Programmable Bath Fan Control - Honeywell HVC0001 Guide Du Propriétaire

Owner's Guide 400-305-000-EFS

About your programmable bath fan control

The bath fan control has been designed to control a single-speed bath fan. To suit your lifestyle, it can
be programmed in any of the following modes of operation:
• Ventilation Mode
• Customized Cycle Mode
• Daily On/Off Mode
• Manual Mode
Unlike the four programmable modes mentioned above, the Countdown Mode
activated by simply pressing a button (see page 17). In this mode, the fan is on until the end of the
programmed countdown time when the controller returns to the programmed mode.
This controller cannot be used with a load lower than 0.1 A or higher than 2.5 A.
The controller can be used to control a bath fan's built-in light or a separate light
fixture connected to the bath fan control circuit. However, the light cannot be
independently controlled and will turn On or Off at the same time as the fan.
(see page 10)
(see page 12)
(see page 14)
(see page 16)
2
can easily be