AEG WE 4125 Mode D'emploi page 50

English
50
Alarm function
Setting the Alarm
1. Push the MODE button twice. The currently set hour of the alarm time will flash.
2. Push the SET button until the hour is set.
3. Push the MODE for confirmation. The minutes will flash.
4. Adjust the minutes with the SET button.
5. Push the MODE button. The time is shown.
Setting the alarm mode
1. Push the MODE button one time. The set alarm time will flash in the display.
2. Select the alarm mode with the SET button.
• Beep sound for 30 seconds:
If you push the SET button one time, the symbol " " will appear in the display.
When getting to the set alarm time, a beep sound will be heard. If no button is
pushed, the alarm sound will automatically turn off after 30 seconds.
• Beep sound + reminder function:
If you push the SET button twice, the symbols " " and " " will appear in the
display. When the set alarm time is reached, a beep sound will be heard. An indi-
vidual beep sound can also be heard at the top of every hour.
• Reminder function:
If you push the SET button three times, the symbol " " will appear in the display.
An individual beep sound can be heard at the top of every hour.
3. Push the MODE button three times to switch to normal mode. The time will be shown.
Turning off the alarm ahead of time
Push the MODE button while hearing the alarm sound to turn off the alarm until the next
day.
Listening to the Radio
1. Turn the device on by moving the POWER ON/OFF switch (7) to the ON position. Turn
the VOLUME control until you have reached the desired volume.
2. Select the required frequency band. Slide the frequency range switch (9) to the desired
position.