Baninni MESSINA 2in1 Mode D'emploi page 4

HOOD OPERATION
The hood should be unfolded by means of
the plastic expanders.
To unfold the hood press
the expanders from above until
the hood fully opens and
the expanders are engaged.
To fold the hood, release the expanders first,
pulling them up and then fold the hood.
In this stroller the rear part of the hood
can be detached by opening the zip
connecting the front and rear part of the
hood.
MOUNTING THE HOOD
DEMOUNTING THE HOOD
To mount the hood,insert the plastic
connector in the same places and fasten
the Velcro straps.
Having folding the hood down,unfasten the
Velcro straps fastened around the tube below
the handles and make the bottom of plastic
connector upwards by finger as shown and
take out the plastic connectors on both sides
of hood.