Publicité
IMPORTANT WARNINGS!
These instructions can also be found at www.tommeetippee.com
Keep this instruction sheet for future reference as it includes important
information.
Do not use chemical sterilizing solutions/tablets in the microwave. Always add
6.8oz/200ml of water before use. Ensure the unit does not boil dry. Ensure the microwave
timer is set correctly on full power. Always allow at least 5 minutes cooling time before
removing from the microwave. It is recommended that oven gloves are used to prevent
scalding. When removing the sterilizer from the microwave, take care as it will contain hot
water and steam. Place on a hard, flat heat resistant kitchen surface. Always open the lid
away from you to allow the steam to escape. Do not use chemical sterilizing solutions/
tablets in the microwave. If you have a combination oven, ensure grill is switched off
and the oven has cooled before use. Do not use metallic items as this will damage your
microwave. Keep out of reach of children. Make sure that the microwave turntable is clean
and dry before use.
USING YOUR MICROWAVE STEAM STERILIZER
Before using your sterilizer, please ensure that you read these instructions thoroughly. Please read and retain this important information for future reference. This sterilizer
is designed for use with Tommee Tippee Closer to Nature and Advanced Anti-Collic bottles and feeding accessories (except bottle brush and any other metallic items). The
sterilizer will hold up to 4 Tommee Tippee bottles, plus accessories.
1. Before sterilization, wash all bottles and feeding accessories in warm soapy water or in a dishwasher (top rack only) to remove any milk residue. Separate all components
for washing and reassemble teat and screw ring for sterilizing. WARNING: DO NOT ALLOW PRODUCT TO COME INTO CONTACT WITH OIL BASED FOODS (e.g. OIL /
TOMATO BASED SAUCES) AS STAINING WILL OCCUR.
2
2. Remove the tray and pour 200ml
of water into the sterilizer base.
6. Place the sterilizer in the microwave, and microwave on full power according to the table below.
7. Allow to cool for at least 5 minutes before removing the sterilizer from the microwave. To release the lid press both side buttons.
8. Wash your hands thoroughly before handling sterilized items. Take care as the items will be hot.
9. Remove the sterilized items. The teat tongs can be used to remove the small items. The lid when removed and placed flat becomes a hygienic work surface for making up
feeds.
10. If the sterilizer is left unopened its contents will remain sterile for up to 24 hours.
WATTAGE
Up to 800w
850w - 1000w
1100w
3
3. Replace the tray.
FULL POWER
8 Minutes
6 Minutes
4 Minutes
4
4. Place the bottle parts in the
locators as shown.
COOLING TIME
5 Minutes
5 Minutes
5 Minutes
5
5. Place the lid over the sterilizer
base. Make sure the sides of the
lid are securely fitted over side
buttons.
EN
Publicité
