HumanTechnik lisa Mode D'emploi page 41

When using power tools always follow the instructions of the
manufacturer and wear suitable protective equipment (e.g.
protective goggles). Kindly check before starting to drill if the-
re are any hidden electric cables and water pipes in the walls. In case of
doubt we recommend using a a cable detector.
Fastening by means of a Humantechnik adhesive pad:
Only the original adhesive pad should be used for installation by me-
ans of an adhesive pad. This has to be ordered separately. The small
given self-adhesive area is not intended for fastening the smoke
detector!
Surfaces on which the adhesive pad is to be mounted have to be smooth,
even, undamaged, clean and free of dust, grease and solvents. The
adhesive pad must not be used on porous surfaces, e.g. plaster, emul-
sion paint, plywood, chipboards and hardboards, chalky or loose paint
layers, crumbling plaster or dirty surfaces.
Adhesive pads may leave residues after disassembly!
The use of the adhesive pad is always at the user's own risk.
When using the adhesive pad, please pay attention to its
mounting instructions.
EN
41