Measurement Unit (Measure Unit) - Mettler Toledo Densito 30PX Mode D'emploi

Selecting functions
- Press the and
- Press the ok/meas. key to activate the marked function.
The instrument switches to the corresponding submenu or activates the desired
function.
Numerical input
- Select decimal places with the
- Change value with the
- Press the ok/meas. key to confirm the value.
Exiting the menu
- Press the esc key.
5.2

Measurement Unit (Measure Unit)

The following units are available for selection:
Density
Available density units:
g/cm 3
Ib/gal (US)
Ib/gal (IP)
Comp. Density (Temperature-compensated density)
Density measurement in g/cm
All results at the same reference temperature ( T
measuring temperature ( T ).
Compensated density = measured density
10 temperature-compensation coefficients can be saved.
The following input is required:
Comp. No.
Comp. Temp.
α 1000
x
For typical temperature-compensation coefficients, see Chapter 13.2; calcula-
tion of α, see page 11.
SG (t/t) (specific gravity)
SG (t/t) = Density of the sample at T
Density of water at T
T Measuring temperatures
SG (specific gravity, temperature-compensated)
SG = Density of the sample, temperature-compensated for T
10 temperature-compensation coefficients can be saved.
The following input is required:
Comp. No.
Comp. T.
1000
α
x
For typical temperature-compensation coefficients, see Chapter 13.2; calcula-
tion of α, see page 11.
METTLER TOLEDO Densito 30PX
keys repeatedly until the desired function is marked.
and
and keys.
1 g/cm 3 = 8.3454 Ib/gal
1 g/cm 3 = 10.0224 Ib/gal
3 at a reference temperature.
Number of the temperature-compensation coefficient (0...9 )
Reference temperature ( T
Temperature-compensation coefficient
Density of water at T
Number of the temperature-compensation coefficient (0...9)
T / T °C (enter temperatures T
0 1
Temperature-compensation coefficient
keys.
, e.g. 20 °C), regardless of the
0
(1 + α (T – T
• •
)
0
1
and T )
0 1
Menu (menu)
))
0
0
9