marklin 29730 Notice D'utilisation page 12

6.3 Operating the Power STAX & light modes
The six different modes of Light STAX can be acti-
vated by pressing the button of the Power STAX.
Press the button to cycle through the various
settings. The default setting is permanent on.
1. The button turns GREEN. All Light STAX Building
Blocks connected to the Power STAX stay
permanent on. A fast running sound will sound
on the connected STAX Sound.
2. The button turns YELLOW. All Light STAX
Building Blocks connected to the Power STAX
start to light up with Sound Activator picking up
sounds.
3. The button turns BLUE. All Light STAX Building
Blocks connected to the Power STAX start
flashing. A slow running sound will sound on
the connected STAX Sound.
4. The button turns RED. All connected Light STAX
building blocks light up in a heartbeat rhythm.
5. The button turns LIGHT BLUE. All Light STAX
Building Blocks connected to the Power STAX
will gently fade off and on.
6 The button turns VIOLET. All connected Light
STAX building blocks light up from the sound-
dependent sound activation (clapping) and
remain on for about 10 seconds. The Light
STAX light building blocks then flash briefly four
times. After that, the Mobile Power STAX Plus
goes into Stand-By mode and is ready for the
next sound activation. A fast running sound will
sound on the connected STAX Sound while the
Light STAX building blocks light up.
6.4 Joining Track Sections and Setting up Track
When setting up the track, please note the track
numbers and the sequence for the track sections.
12
Putting track together
Taking
track apart
Layout
!