Opening The Stand Cover Plate, Stand K Edu; Fig. 22 Opening The Stand Cover Plate, Stand K Edu - Zeiss Stemi 508 Mode D'emploi

Stereo microscope
Stemi 508
5.2.2 Opening the stand cover plate,
stand K EDU
The stand cover plate (Fig. 22/1) may be removed
for cleaning or to remove any foreign matter which
might have fallen in inadvertently.
•
To this effect, release the three recessed head
screws (Fig. 22/2), lift off the stand cover plate
(Fig. 22/1) carefully and then put it aside.
•
Make sure that the cable is not disconnected
from the stand cover plate (Fig. 22/1).
To clean the LED board, use a soft lint-
free cloth, a cotton wool bud wound
around a round wooden stick or a brush
with natural bristles, possibly moistened
slightly in distilled water.
09/2017
CARE, MAINTENANCE AND SERVICE
Maintenance
Fig. 22
435064-7144-008
Opening the stand cover plate,
stand K EDU
ZEISS
33