Scope Of Delivery; Dimensions; Installation Example; Assembly Instructions - Franke AQRE432 5526 11 24-F Notice De Montage Et De Mise En Service

7.

Scope of Delivery

Item Description
1 Cover plate with control electronics and sensor
2 Self-closing solenoid valve cartridge
3 Connection terminal with coupling (supplied only for
24V DC model)
4 Transformer with connection terminal (supplied only for
230 V AC model)
5 Mounting frame (fastened in cover plate)
6 Extra items:
Cylinder head screws, plain washers, seal with screw
Installation and Operating Instructions
8.

Dimensions

9.

Installation Example

10. Installation Example for AQUAFIX Installation Element

11. Assembly Instructions

☞
Important!
Before installing, flush the pipes in compliance with DIN 1988.
11.1 Loosen the screws (a).
11.2 Cut off the shell protection (b) so it is flush with the front edge of the tiles.
11.3 Close the flow volume regulator (c) with a screwdriver, 8 mm head width.
☞
Screw the flow volume regulator up to the stop limit.
☞
Important!
Do not remove the circlip.
11.4 Remove the flush-plug (d).
11.5 Screw in the solenoid valve cartridge (e).
11.6 Use the flush-plugs as an assembly key to tighten the solenoid valve cartridge.
6