Environmental Protection; Standard Spare Parts; Manufacturer's Declaration Of Ce - Viking ME 443 Manuel D'utilisation

– incorrect electrical connection
(voltage),
– product modifications not approved by
VIKING,
– the use of tools or accessories which
are not approved or suitable for the
machine, or are of inferior quality,
– improper use of the product,
– use of the product for sporting or
competitive events,
– resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots),
– corrosion and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
44
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.

15. Environmental protection

Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal ( 4.9).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.

16. Standard spare parts

Mowing blades
6338 702 0100
Blade fastening screw
6310 760 2800
The fastening elements for the
mowing blade (e.g. blade fastening
screw) must be replaced when
replacing the blade, i.e. when
installing the blade. Spare parts are
available from a VIKING specialist
dealer.
17. Manufacturer's
declaration of CE conformity
We,
VIKING GmbH
Hans Peter Stihl-Strasse 5
A-6336 Langkampfen/Kufstein
declare under our sole responsibility that
the machine
Lawn mower, manually-operated and
mains-powered (ME)
manufacturer's VIKING
brand:
type: ME 443.1
ME 443.1 C
serial number 6338
conforms to the following EC directives:
2000/14/EC, 2011/65/EU, 2014/30/EU,
2006/42/EC
The products have been developed in
conformance with the following standards:
EN 60335-1, EN 60335-2-77
Applicable conformity assessment
procedure:
Appendix VIII (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
0478 121 9920 D - EN