gourmetmaxx MX-446 Mode D'emploi page 19

1. Place the motor unit (4) on a dry, even, and fi rm surface. Press the suction feet (6) fi rmly
onto the surface.
4. Turn the lid (1) anticlockwise and remove it from the mixing container (2).
5. Pour the ingredients you want into the mixing container (2).
A
7. Make sure that the rotary switch (5) is in position 0. Then insert the mains plug into a
properly installed mains socket that is easily accessible.
8. Move the rotary switch (5) to the position you want:
– Position 1:
– Position 2:
– Position PULSE:
The lid (1) has two parts. To add ingredients during operation, the insert in the
middle of the lid can be removed.
9. To switch off the device, move the rotary switch (5) back to position 0. Remove the mains
plug from the mains socket.
10. Turn the mixing container (2) anticlockwise until you feel some resistance and remove the
container from the motor unit (4).
2. If you have not already done so, place the mixing container (2),
as shown, onto the motor unit (4). The pouring spout (7) on
the container must be on the same side as the rotary switch (5).
3. Secure the mixing container (2) in place by turning it clockwise.
6. Close the lid (1) again. To do this, place the "nose" (A) on the
lid, as shown, next to the pouring spout (7) and turn the lid
clockwise to tighten it.
The device operates continuously at speed setting 1 ("slow").
The device operates continuously at speed setting 2 ("fast").
The device operates in pulse mode.
The rotary switch must be held onto.
19