Regulations - Ce Mark; Customer Service - GEL BOY JET 4S Notice Technique D'installation Et D'utilisation

DESCRIPTION
PUMP FOR FILLING SOLAR AND TRADITIONAL HEATING SYSTEMS
BOY JET 4 S is a centrifugal pump used for filling solar heating systems. It can also be used for filling
additives into traditional heating systems or for spraying sanitizing chemicals.
The refilling of the liquid is fast and easy. The steel skid with wheels makes it particularly easy to carry
without neglecting strength and resistance.
PRELIMINARY INSPECTION
Take out the pump from the carton and check it is in perfect condition. Also check that the data
on the rating plate correspond to the desired ones. For any problem, immediately contact the
supplier, specifying the kind of fault.
If there is any doubt about the safety of the machine, do not use it and contact your dealer.
1 - REGULATIONS – CE MARK
Declaration of Conformity
The pumps are in conformity with the European Directives, Laws and Regulations.
Low Voltage Directive:
2014/35/UE
93/68/CEE
Electromagnetic Compatibility Directive:
2014/30/UE
92/31/CEE
93/68/CEE
RoHS and WEEE Directives:
2011/65/UE:2011
(UE) 2015/863
2012/19/UE
QUALITY
GEL equipment is manufactured with high-quality acid-resistant materials and submitted to severe
operating tests.
Follow these instructions to avoid any operating and servicing problems.

2 - CUSTOMER SERVICE

For technical support please directly turn to your dealer or installer from whom you have purchased the
machine.
For enquiries on spare parts, please specify model of pump, item code, description and number of pieces
required.
ù+
12