6. Bluetooth
pairing
®
Note - Pairing
• Make sure that your Bluetooth
• For more information, please refer to the operating instructions of your device .
The earphones and the device should not be more than 1 metre apart . The shorter the distance, the
better . Ensure that the earphones are switched on .
1
Check the status of the status LED (3)
red/white
white
-capable device is switched on and that Bluetooth
®
If the status LEDs (3) on the earphones flash alternately:
the earphones are searching for a Bluetooth
If the status LEDs (3) are flashing every 4 seconds:
the earphones are already paired with a Bluetooth
is activated .
®
connection .
®
device .
®
7