Using The Pump For The First Time - Gardena 6000 Mode D'emploi

1777_20.960.07_Tauch_GB

3. Using the Pump for the First Time

Hose diameter
Hose connection
of universal fitting
a
b
Hose connection
Connection kits needed
for 13 –19 mm hoses:
Connecting the hose:
12
27.07.2011 15:50 Uhr
13 mm (1/2")
15 mm (5/8")
19 mm (3/4")
a
Cut off topmost
nipple at a
13 mm (1/2"): GARDENA Pump Connection Set, Art. No. 1750
15 mm (5/8"): GARDENA Tap Connector, Art. No. (2)902, and
Standard Hose Connector, Art. No. (2)916
19 mm (3/4"): GARDENA Pump Connection Set, Art. No. 1752
Best results in delivery capacity are achieved when using
38 mm (1 1 / ") hoses.
2
The universal fitting
the table above.
1. Screw L-piece
2. Cut off nipples of the universal
to match the hose connection.
3. Screw the universal fitting
4. Connect the hose to the universal fitting
We recommend that 38 mm (1
be fastened with an additional GARDENA hose clamp Art. No.
7193.
Only for 13 mm (1/2") hose:
The universal fitting
Regulator Valve Art. No. 977 so that the contents of the out-
let line do not flow back through the pump after pumping. The
Regulator Valve can be ordered from your GARDENA dealer.
Seite 12
25 mm (1")
b
Do not cut off any
nipples
llows connection of all the hoses listed in
into the pump.
fitting which are not needed,
onto the pump.
.
1 / ")- and 25 mm (1") hoses should
2
can also be equipped with a GARDENA
38 mm (1 1 / ")
2
Cut off top two
nipples at
b