ATS Dental Amalgator TAC-400M Mode D'emploi page 5

The product warranty does not cover any damage resulting from the use of third-party replacements parts.
The Manufacturer shall be released from all obligations under this warranty in the event of improper installation; damage
due to casualty; or obvious misuse including but not limited to damage from liquids.
The Manufacturer shall in no event be liable for any consequential damages arising from the misuse of the product. Only
the above stated warranty shall be applicable, and all other warranties, expressed or implied, are hereby excluded.
All correspondence concerning the product should specify the model and serial number.
Manufacturer ATS DENTAL – Pistoia – Italy
Model TAC 400/M
Dimensions 300x220x170
Materials Metal
Noise < 65 dBA
Supply Voltage AC230V
Frequency 50/60 Hz
Conditions of use: Temp +5° - +40°
Shipping and Storage conditions: Temp +5°C/+65°C (+41°F/+149°F) RH < 20-95% non-condensing
Manufacturer
Intermittent Operations
Fuse
Indicates a hazardous situation
This symbol remind to consult the present Operating and Maintenance Instruction Manual.
This symbol on the product or on its packaging indicates that this product may not be treated as household
waste. Instead it shall be handled over the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this product, please contact
your local city office, your household waste disposal service or the shop where you purchased the product
High Voltage Inside. This equipment operates from A.C mains. Only authorized personnel to open unit.
LIMITATION OF LIABILITY
Except where prohibited by law, ATS DENTAL srl will not be liable for any loss or damage arising from this product, whether direct,
indirect, special, incidental or consequential, regardless of the theory asserted, including warranty, contract, negligence or strict
liability.
Information valid as of March 2016
_______________________________________________________________________________________
DFU - FTC400 Rev. 0 - Mar 2016
Page 5 di 24
TECHNICAL DATA
SYMBOLS
EEC 93/42
ATS DENTAL srl – Advanced Technology Solution
Nominal Power 110 VA
Class MD I rule 12 in Annex IX 93/42/EEC
Console IP21
7488 Classification Type 1
Operating Mode 30" ON – 180" OFF
Max Working Time 30'
Fuses 1xT2.0A 250V
Supply Voltage
V
MOD - COD Model - Code
Electronic DFU available at
www.atsdental.it
Ground
Important Information
.