How The Energizer Works - Gallagher M1000 Notice D'utilisation

Gallagher 3E3264 M1000 Energizer User Manual

HOW THE ENERGIZER WORKS

The energizer sends electrical pulses along the fence line, about one second apart.
These pulses give the animal a short, sharp, but safe shock. The shock doesn't harm
the animal. It is suffi ciently memorable that the animal never forgets the shock,
and will avoid the fence.
Europe only:
This me delayed electric fence energizer has a delay me of 20 seconds a er a
change in load on the fence, before it can increase its maximum output energy.
Warning: The energizer must wait 20 seconds a er power up to be in normal
opera on. A sudden increase in load is indicated by a slow pulse rate, an internal
buzzer and solid red on the Fence Fault LED, for 15 minutes or un l the load is
removed.
Practical Hints
• Check your local ordinance on fencing laws: local laws may require a permit
before use.
• Check the fence periodically. Remove any fallen branches, weeds or shrubs
because these will cause the fence to short out and will reduce animal
control.
• All animals need me to learn to respect the fence. It may take several days to
train the animal and the fence may require minor adjustments.
• Animals that are prone to jumping may be diffi cult to confi ne. You may need
to try diff erent fence heights to determine the best height.
• Use top quality insulators: low quality or cracked insulators and plas c tubing
are not recommended because they will cause shor ng.
• Use joint clamps on all steel wire connec ons to ensure a high quality circuit.
• This energizer must be earthed using galvanised metal earth stakes to ensure
the electric fence works correctly.
• Double Insulated Cable should be used in buildings, under gateways and
where soil could corrode exposed galvanised wire. Never use household
electrical cable. It is made for a maximum of 600 volts and will leak electricity.
• On permanent power fencing, use high tensile 12.5 gauge (2.5 mm) wire.
7