Ferm OTM1006 Notice Originale page 3

MULTITOOL
OTM1006
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for many
years to come.
SAFETY WARNINGS
WARNING
Read the enclosed safety warnings,
the additional safety warnings and the
instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, fire and/or serious injury.
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of
life or damage to the tool in case of non­
observance of the instructions in this
manual.
Risk of electric shock
Do not use in rain
Indoor use only
Class II machine ­ Double insulation ­
You don't need any earthed plug.
Max temperature 40
Additional safety warnings for multitools
•
•
•
•
•
•
•
•
•
•
C
0
Do not throw the battery into fire
Do not throw the battery into water
Do not dispose of the product in
unsuitable containers.
Separate collection for Li­ion battery.
The product is in accordance with the
applicable safety standards in the
European directives.
Contact with or inhalation of dust coming
free during use (e.g. lead­painted
surfaces, wood and metal) can endanger
your health and the health of bystanders.
Always wear appropriate protective
equipment, such as a dust mask.
D o not work materials containing asbestos.
Asbestos is considered carcinogenic.
D o not work metal with a magnesium content
of more than 80%.
B e very careful when working painted
surfaces.
D o not use accessories which are not
specifically designed and recommended by
the manufacturer. Risk of personal injury.
I nspect the machine and the accessories before
each use. Do not use accessories which are
bent, cracked, or otherwise damaged. If the
machine or one of the accessories is dropped,
inspect the machine or the accessory for
damage. If necessary, replace the accessory.
O nly use accessories that are recommended
by the manufacturer.
O nly use accessories that are suitable for the
application.
O nly use accessories with the correct
dimensions.
D o not use accessories that require liquid
coolants. Risk of electric shock.
M ake sure that the accessories are properly
mounted. Do not use adapters or other aids
to mount accessories with another spindle
diameter.
3