Télécharger Imprimer la page

Lifensoul BN301 Manuel De L'utilisateur page 3

Publicité

Les langues disponibles

Les langues disponibles

PRODUCT SETUP
1. Please press and hold the
button for 3 seconds to power up. Continue to hold the
button for another 6
seconds to enter Bluetooth pairing mode. LED light will blink red and blue while in this mode. You will hear a voice
prompt saying "Pairing".
2. On the Bluetooth enabled devices go to SETTINGS > BLUETOOTH. And then search for new Bluetooth devices.
3. After search is made, select "LnS-BN301" and connect. You will hear a voice prompt saying "Pairing complete". After
connected, the LED light will keep blinking blue.
Note:
1. Specific pairing procedures may vary with different mobile phones. Please refer to your device's user manual for
specific pairing instructions.
2. If the pairing is not successful, please turn off the headset and turn on the headset to enter the pairing mode again.
3. Device will automatically connect to the last connected Bluetooth device.
CHARGING
1. Plug the Micro USB cable into the charging port. It takes about 4 hours to fully charge from an empty battery. When
the battery is full, LED light will turn blue.
2. First time charging battery, please be sure the battery has been charged fully before use.
Note: When you plug the charger cable please turn off the Bluetooth Headset.
LED INDICATOR
1. LED off > Power off
2. BLUE > Power on
3. Flashing Blue/Red > Pairing mode
4. RED > Low Battery
5. Flashing Red > Battery almost drained
6. Flashing Blue > Battery is recharging
HOW TO TAKING PHONE CALLS / PLAYING MUSIC
You can use this headset to receive and make phone calls. When you receive an incoming call, the music will
automatically pause. Press the On/Off button to answer phone calls. Your voice will be picked up through the built-in
microphone.
1. Power on/off: Press the On/Off button for 3 seconds.
2. Answer/end call: Press the On/Off button to answer or end call.
3. Make a call: Use your phone to dial as usual. Listen and talk through this headset.
4. Reject a call: Hold the On/Off button for 1 second.
5. Voice dial: Press and hold the On/Off button, release it till hearing indication sound, and then speak the
Number or name of call you want to make.
6. Redial last number: Short press the On/Off button twice quickly.
7. Play/Pause: Press the On/Off button.
8. Next track: Press the > button to skip to the next track.
9. Previous track: Press the < button to skip back to the previous track.
10. Volume: Press + button to volume up and press - button to decrease volume.

Publicité

loading