Safety Information - Knick ProLine P 44000 Mode D'emploi

WARNING!
Protection against electric shock
For applications with high working voltages, take measures to
prevent accidental contact and make sure that there is sufficient
distance or insulation between adjacent devices.
NOTICE!
Be sure to take protective measures against electrostatic dis-
charge (ESD) when handling the devices!
NOTICE!
The ProLine P 44000 Pt100 transmitters shall be installed only by qualified
and specially trained personnel authorized by the operating company.
Do not connect the device to power supply before it is professionally
installed.
Be sure to observe the national codes and regulations for installation and
selection of cables and lines.
• Make sure that the connecting cables have an appropriate temperature
rating.
• Mains supply must be protected by a fuse ≤ 20 A.
• Warning against misuse:
The device shall only be operated within the conditions specified by the
manufacturer.
The system installer is responsible for the safety of the system in which
the device is integrated.

Safety Information

25