Warranty/Service - Beurer BF 950 Mode D'emploi

Display
No Bluetooth
®
connection
( symbol is missing).

14. Warranty/service

In case of a claim under the warranty please contact your local dealer or the local representation which is
mentioned in the list "service international".
In case of returning the unit please add a copy of your receipt and a short report of the defect.
The following warranty terms shall apply:
1. The warranty period for BEURER products is either 5 years or- if longer- the country specific warranty
period from date of Purchase.
In case of a warranty claim, the date of purchase has to be proven by means of the sales receipt or
invoice.
2. Repairs (complete unit or parts of the unit) do not extend the warranty period.
3. The warranty shall not be valid for damages because of
a. improper treatment, e.g. nonobservance of the user instructions.
b. repairs or tampering by the customer or unauthorised third parties.
c. transport from the manufacturer to the consumer or during transport to the service centre.
d. The warranty shall not be valid for accessories which are subject to normal wear and tear
(cuff, batteries etc.).
4. Liability for direct or indirect consequential losses caused by the unit are excluded even if the damage
to the unit is accepted as a warranty claim.
cause
Device outside the range.
Connection set-up takes too
long.
No connection to the app.
User memory space is full.
New measurements overwrite
the older measurements.
The batteries in the scale are
empty.
Solution
The range in the open is approx. 10 m.
Walls and ceilings reduce the range.
Other radio waves may interfere with the
transmission. Therefore, do not position the
scale near devices such as WIFI routers,
microwaves, induction hobs etc.
Faster Bluetooth interval when the scale is
switched on: Briefly apply pressure to the
scale until the time and temperature are dis-
played.
• Close all apps completely
(including in the background).
• Switch Bluetooth
• Switch the smartphone off and back on
again.
• In the Bluetooth
system, the scale must not be connected.
• Remove the batteries from the scale for a
short period and reinsert them.
• See FAQs at www.beurer.com.
Open the app. The data is transferred auto-
matically.
Replace the batteries in the scale.
27
off and back on again.
®
settings of the operating
®