Configuration; Dip Switch Settings - Westermo TD-29 AC Manuel D'installation

6.9 Configuration

S1:1–8

6.9.1 DIP switch settings

DIP-switches are accessable under the lid on top of the unit. DIP-switches are used to
configure the modem.
Warning!
!
Prevent damage to internal electronics from electrostatic discharges (ESD)
by discharging your body to a grounding point (e.g. use of wrist strap),
before the lid on top of the modem is removed.
Warning! Do not open connected equipment.
!
Prevent access to hazardous voltages by disconnecting the unit from AC/DC
power supply and all other electrical connections.
NOTE
When configuring via DIP-switches, the settings of DIP-switches configure the unit only
after a power reset. A setting configured by any other method during normal
operation, overrides the DIP-switch setting. However, at power up, the DIP-switch
settings have precedence over the setting configured by any other method.
6611-2001
S2:1–4
25