Timing Belt - Yamaha Motor F100A Manuel D'entretien

INSP
ADJ
POWER UNIT
3
3
4. Install:
Oil filter 3
Oil filter:
18 Nm (1.8 m • kg, 13.3 ft • lb)
NOTE:
Lubricate the rubber seal with engine oil
before installation.
5. Add:
Engine oil
Recommended engine oil:
4 stroke motor oil
API: SE, SF, SG or SH
SAE: 10W-30, 10W-40
Oil quantity:
with oil filter
4,700 cm
(159 US oz, 165 Imp oz)
without oil filter
4,500 cm
(152 US oz, 158 Imp oz)
6. Install:
Oil filler cap
7. Check:
Engine oil level
Refer to "Engine oil level".
NOTE:
Run the engine for several minutes and
then check the engine oil level.
If the engine oil is still not within the
proper level, add/drain as needed.

Timing belt

1. Inspect:
Timing belt
Wear/damage → Replace.
3-9
3
3
E