Publicité
Les langues disponibles
Les langues disponibles
USING THE DIGITAL PHOTO FRAME
This section explains how to use the digital photo frame. Read the following
instructions to discover all its functions.
Getting started
1. Before using this product for the first time, remove the static label from
the LCD screen.
2. Save pictures on a SD/MMC card and insert it into the SD/MMC card slot
on the right side of the frame.
To Display your pictures
1. Press the "POWER" button to switch on or switch off the photo frame.
2. The photo frame will automatically launch a slideshow of the pictures
stored on the SD/MMC card.
3. Press the "PLAY/PAUSE"
the
button again to resume playback.
4. To display the previous picture, press and hold the SKIPB
least seconds, then release it.
5. To display the next picture, press and hold the SKIPF
seconds, then release it.
Warning: to ensure optimal performance of the digital photo frame, it is
recommended to use pictures with a maximum size of 500KB. Larger picture
size will slow down the loading times.
Picture settings
1. Press the "MENU" button to enter the picture settings menu.
2. To select "Brightness", "Contrast", "Colour" or "Language", press and
hold the "MENU" button for at least 2 seconds, then release it (repeat the
procedure to select the desired setting).
. Use the
and
select the desired language.
4. To save your settings and exit the menu, press the "MENU" button.
Slideshow delay interval settings
Press repeatedly the "INTERVAL" button to set the slideshow delay interval:
5s/15s/30s/45s/1m/15m/30m/45m/1h.
1
button once to pause the slideshow. Press
buttons to increase or decrease the settings and to
button for at
button for at least
Copyright © Lexibook 008
Publicité
