marcel aubert MA 1100 Mode D'emploi page 17

Refer to specifications in the "Technical Data" section for binding operational limits.
Do not use this unit near water or in any space with excessive humidity. Do not place flammable materials
on or near the unit at any time. Keep unit away from any sources of heat. The product has not been ap-
proved for operation in areas subject to explosion hazards! Not suitable for use with flammable mixtures
(such as anaesthetics, oxygen or disinfectants....)!
Never block the ventilation openings of the instrument, otherwise it can overheat. Ensure that the free cir-
culation of air is not impaired in any way.
Never spill liquid on the unit or insert objects into the unit! This could result in electric shock or damages to
the unit.
The device may only be operated using the power supply voltage indicated.
Never open the device or any components unless instructed expressly to do so by these instructions.
Cleaning: Disconnect unit from the power supply before cleaning and only clean with a damp cloth. Never
use combustible or flammable liquids. If fluids accidentally enter the device, unplug the power supply ca-
ble immediately and take the unit to the service location.
Maintenance: The operator must maintain all national laws and standards for regular inspections. An in-
spection must be performed not later than every 2 years by specialists who evaluate the safety of the de-
vice, recognize possible effects and dangers and can determine the conformity with guidelines and stand-
ards. These inspections should cover at least: Protective conductor inspection, leakage current inspection
and visual inspection with cleaning and functional test
Spare parts: Only original spare parts may be used. If this is not done, it can lead to personal injury and
material damage. Refer to the „Spare Parts" section for component codes.
Liability: As the ultimate legal entity, the operating institution is responsible for ensuring the proper use of
the device and for providing other operators with the necessary information and specifies the competencies
required to operate the device.
Disposal: Observe all national environmental requirements and laws for the disposal of the device or its
parts. Separate the components (e.g. by plastics, electronics, lamps, metals...) and dispose of them
through national disposal companies!
Disconnect the power supply cable when the unit is not being used for an extended period of time. Use
only original power cables and route the cables so that they cannot be pinched or separated. For safety
reasons, only use a 3-wire power cable with protective conductor.
Repairs that are not described in this document must only be carried out by authorized workshops!
The manufacturer is not liable for any damage resulting from a failure to comply with the aforementioned
instructions!
State of the art: This product constitutes state-of-the-art technology and employs recognized safety
standards.
ma 1100-1200-1300$24.docx 17/24