TrekStor i.Beat motion Mode D'emploi page 15

Mode: Music
Switch to the "m " mode.
usic
Play mode
•
Briefly press the
A
Pause
•
Briefly press the
A
Change track
•
Briefly press the
F
song.
Fast-forward/rewind within a track
•
You can navigate within the current song by holding down the
or button to fast-forward or rewind.
E
Increase/lower volume
•
Briefly press the
Q
Note: If you hold down the
Mode: Video
Switch to the "V " mode.
ideo
You can watch movie files (*.avi) in video mode. To create movie files in AVI format, please use the "AVic
on the accompanying CD.
The functions in this mode are like the ones in "m
Mode: FM radio
Switch to the "fm " mode.
rAdio
Note: Always connect your earphone or headphone to the headphone jack of the i.Beat motion since the
earphone/headphone cable serves as an antenna for the internal radio.
To go to the FM radio menu, hold the
select the desired menu item, and confirm by briefly pressing the
Switching between manual station selection and memory mode
•
In the FM radio menu, choose between manual station selection "s
Switching between saved stations
•
In memory mode "p
reset
button.
F
Manual frequency change/manual search
•
In manual station selection mode "s
frequency by 0.1 MHz. Hold down the
the upper and lower frequencies for stations with strong reception.
Saving individual stations
•
Change to the FM radio menu for manual station selection "s
select "s " from the FM radio menu. Press the
AVe
confirm the next question by briefly pressing the
button to play an audio file.
button to stop playback. Repress the
button to select the next song. Briefly press the
or button to raise or lower the volume.
R
or button, the volume changes gradually.
Q R
button for approx. 1 second. Press the
A
", you can switch between the existing memories by briefly pressing the
", briefly press the
cAn
or
E
button to continue playing.
A
E
or
E
" mode.
usic
button.
A
cAn
or button to change the reception
E F
button for the i.Beat motion to automatically scan
F
". Choose the desired frequency, and
cAn
or button to select the desired memory, and
R Q
button.
A
– 15 –
button to select the previous
button. Hold down the
F
or button to
E F
" and memory mode "p
reset
EN
F
"
onVerter
".
or
E