Performing With Another Person (Partner Mode); Using Pedals; Effects - Korg LP-380 Manuel D'utilisation

Performing with another person
(Partner mode)
Two people can play in the same range with the keyboard
divided in half between them. This is called the Partner
mode.
1. Press the FUNCTION button.
The FUNCTION and PIANO1 buttons will light up.
2. Press the E.PIANO1 button.
The E.PIANO1 sound button lights up, and oFF ap-
pears in the display.
1,5
3. Press the UP button beside the display to select on.
Partner mode is turned on, and the PIANO1 sound is
used for both the left and right sides of the keyboard.
While the Partner mode is ON, a dot in the lower right
of the display appears.
The right side of the keyboard, from E4 to C8, produces
sounds in a range two octaves lower (E2–C6).
The left side of the keyboard, from A0 to E ♭ 4, produces
sounds in a range two octaves higher (A2–E ♭ 6).
A0 E 4
Pitches A2 to E 6 for the
player on the left side
4. To exit Partner mode, press the DOWN button beside
the display to select oFF.
5. Press the FUNCTION button.
The FUNCTION button turns off.
In Partner mode, the sound for the left and right sides can
be changed, and the volume can be adjusted. For details,
refer to "Partner mode settings" on page 12.

Using pedals

The LP-380 has three pedals; damper,
sostenuto, and soft.
You can use the pedals to make your
playing more expressive and realistic.
Soft pedal (left)
Pressing this pedal will make the tone softer. You can con-
trol the softness of the tone by how far down you press the
on pedal ("half-pedaling").
Sostenuto pedal (center)
Pressing this pedal will apply the damper effect only to the
notes that are already being held down on the keyboard,
and will sustain only those notes. The damper effect will
not be applied to any additional notes that you play while
holding down the Sostenuto pedal.
Damper pedal (right)
Pressing this pedal will sustain the sound, producing a
richly resonant decay. You can also add the damper reso-
nance to the classic piano and the grand piano tone (bank
1 and 2 of Piano1). You can also use halfpedalling, with a
gradual resonance effect depending on the depth of the
pedal pressure ("half-pedaling").
2
3
4
Partner mode indication
E4 C8
Pitches E2 to C6 for the
player on the right side
Soft pedal
Damper pedal
Sostenuto pedal
In Layer mode, you can select the sound(s) where you
want to apply the pedal. (refer to "Specifying layer
pedals" on page 13)
In Partner mode (see page 12), the damper effect can
be applied independently by both players.

Effects

Brilliance
This effect changes the brightness of the tone.
The setting can be changed by holding down the BRIL-
LIANCE button and pressing the UP or DOWN button
beside the display.
The setting appears in the display with 3 producing a
brighter sound and 1 producing a less bright sound.
The same setting is applied to all sounds and remains ap-
plied until the LP-380 is turned off. When the instrument
is turned on, the default setting 2 is selected.
Brilliance cannot be turned off.
Reverb
This effect adds ambience and depth to the sound, produc-
ing the sense of performing in a concert hall. As a factory
default, the on/off setting for this effect as well as this ef-
fect's setting are saved with each sound.
Each press of the REVERB button turns the reverb on
(button lights up) or off (button turns off).
To change this setting, hold down the REVERB button
and press the UP or DOWN button beside the display.
The setting appears in the display with 3 producing a deep
reverb effect and 1 producing a light reverb effect.
If a different sound is selected or if the LP-380 is turned
off, the on/off setting for this effect as well as this effect's
setting return to their factory defaults (default settings).
Chorus
Chorus adds modulation to the sound, producing an ex-
pansively rich sound. As a factory default, the on/off set-
ting for this effect as well as this effect's setting are saved
with each sound.
Each press of the CHORUS button turns the Chorus ef-
fect on (button lights up) or off (button turns off).
To change this setting, hold down the CHORUS button
and press the UP or DOWN button beside the display.
The setting appears in the display with 3 producing a deep
chorus effect and 1 producing a light chorus effect.
If a different sound is selected or if the LP-380 is turned
off, the on/off setting for this effect as well as this effect's
setting return to their factory defaults (default settings).
9