Introduction - Sony MSAC-PR1 Mode D'emploi

Introduction

The PC Card/ Parallel Port Adaptor MSAC-PR1 used with the
Sony Memory Stick PC Card Adaptor allows data to be read
and written data using a desktop PC.
Required System Environment
• A PC Card Adaptor for use with a Sony Memory Stick is
• A Microsoft Windows 95/98/NT 4.0 OS.
• A desktop type IBM PC/AT compatible PC, with D-sub25 parallel
• Cannot be used with anything other than the printer being
• This device supports ATA flashcards but operations with these
• See page 24 for confirmed compatible equipment.
Memory Stick is a trademark of Sony Corporation.
Microsoft and Windows are registered trademarks of the Microsoft
Corporation in the United States and other regions.
IBM and PC/AT are registered trademarks of the IBM Corporation in
the United States and other regions.
Other company names and product names appearing in this document
are registered trademarks of those companies respectively.
GB
2
recommended.
port connector and a PS/2 or AT type keyboard connector.
connected to the parallel port of the machine.
cannot be guaranteed.
No part of the software bundled with this equipment or this
User's Guide may be reproduced in any form, nor may the
software be lent or rented without prior permission from Sony
Corporation.
Sony Corporation disclaims all liability for any damage or loss
resulting from the use of this equipment or the bundled
software, and for all claims from any third parties. Please be
sure to back up any important data.
Please refer to the warranty card provided with this product for
the warranty terms and conditions.
The software bundled with this equipment must not be used in a
system other than that with which it is provided.
Sony Corporation reserves the right to change the specifications
of this equipment and the bundled software without notice.