Klarstein AROMATICA II Mode D'emploi page 37

After descaling:
1. Place the carbon filter holder (20) in the water reservoir (14).
2. Close the cover (24).
3. Switch off the appliance by pressing the on/off button (1).
4. Keep the coffee quantity selector (3) and the coffee strength selector (4)
pressed until the indicator (D) disappears from the display (8) (fig. C).
5. Clean the outside of the appliance with a damp cloth. Dry the outside of the
appliance with a clean, dry cloth.
6. The appliance is ready for use.
Replacing carbon filter
1. Open the cover (24).
2. If necessary, empty the water reservoir (14).
3. Remove the carbon filter holder (20) from the water reservoir (14).
4. Open the cover (25).
5. Remove the old carbon filter (26).
6. Place the new carbon filter (26).
7. Close the cover (25).
Note: The carbon filter holder must not be placed in the water reservoir before
the appliance has been descaled. This does not apply the first time you put the
appliance into operation.
EN
37