Operator Safety - BEAL PERFORMER NPBR155/84H Notice D'emploi

Operator Safety

KNOW YOUR PRODUCT
If you understand the unit and how the unit operates, you
will get the best performance. As you read this manual,
compare the illustrations to the unit. Learn the location
and the function of the controls. To help prevent an
accident, follow the operating instructions and the safety
rules. Save these original instructions for future reference.
It is the responsibility of the owner to follow the
instructions contained in this manual.
WARNING
Look for this symbol to indicate important
safety precautions. This symbol indicates:
"Attention! Be Alert! Your Safety Is At Risk."
WARNING
This cutting machine is capable of amputating
hands and feet and throwing objects. Failure to
observe the following safety instructions could
result in serious injury or death to the operator
or bystanders.
FOR RIDE-ON (RIDING) ROTARY
MOWER MACHINES
Training
1. Read the instructions carefully. Be familiar with the
controls and the proper use of the equipment.
2. Never allow children or people unfamiliar with these
instructions to use the mower. Local regulations
may restrict the age of the operator.
3. Never mow while people, especially children, or
pets are nearby.
4. Keep in mind that the operator or user is
responsible for accidents or hazards occurring to
other people or their property.
5. Do not carry passengers.
10
6. All drivers should seek and obtain professional and
practical instruction. Such instruction
should emphasize:
a. the need for care and concentration when
working with ride-on machines;
b. control of a ride-on machine sliding on a slope
will not be regained by the application of the
brake. The main reasons for loss of control are:
• insufficient wheel grip;
• being driven too fast;
• inadequate braking;
• the type of machine is unsuitable for
its task;
• lack of awareness of the effect of
ground conditions, especially slopes;
• incorrect hitching and
load distribution.
Preparation
1. While mowing, always wear substantial footwear
and long trousers. Do not operate the equipment
when barefoot or wearing open sandals.
2. Thoroughly inspect the area where the equipment
will be used and remove all objects which may be
thrown by the machine.
3. WARNING-Fuel is highly flammable.
a. Store fuel in containers specifically
designed for this purpose.
b. Refuel outdoors only and do not smoke
while refuelling.
c. Add fuel before starting the engine. Never
remove the cap of the fuel tank or add fuel
while the engine is running or when the engine
is hot.
d. If fuel is spilled, do not attempt to start the
engine but move the machine away from the
area of spillage and avoid creating any source
of ignition until the fuel vapors have dissipated.
e. Replace all fuel tanks and container
caps securely.
4. Replace faulty silencers.
5. Before using, always visually inspect to see that
the blades, blade bolts, and cutter assembly are
not worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance.
6. On multi-blade machines, take care as rotating one
blade can cause other blades to rotate.
en en