Use And Location Requirements - Whirlpool XHS1000XX Instructions D'installation

USE AND LOCATION
REQUIREMENTS
The Adjustable Clothes Rack can be installed onto most full
size front load or top load washers or dryers in the following
configurations:
Typical top-load
installation
Typical front-load
with pedestal
installation
Spacing Requirements
12.5"
(318 mm)
39"
(991 mm)
Select the side of the washer or dryer that you plan to install
the Adjustable Clothes Rack based on the spacing requirements
noted above.
IMPORTANT: The Adjustable Clothes Rack has a maximum
weight limit of 20 lbs (9.07 kg).
2
Typical front-load
installation
Typical stacked
front-load installation
12.5"
(318 mm)
79"
(2007 mm)
KEY PARTS
Top cap
Spring
Top washer
Hanger arms
Arm support collar
Top pole
Mid pole
Magnetic arms
Base pole
Foot
assembly
3"
(76 mm)
NOTE: The Adjustable Clothes Rack requires 3" (76 mm)
clearance side to side to enable it to fit between the washer
and dryer or between the washer/dryer and the wall.
Top pole
release button
Mid pole
release button
Height adjuster
Pressure plate
Foot