Lehmannaudio Drachenfels Mode D'emploi page 23

44 Drachenfels
Sample applications
EN
1 | SACD player and one headphone
In this sample configuration the Drachenfels is used as a headphone amp with
an SACD player.
After connecting the Drachenfels to the mains grid connect the SACD player to
the line input located on the rear panel of the device by means of an RCA cable.
The headphone is then connected on the front panel of the device.
2 | Media player, active loudspeakers
In this sample configuration the Drachenfels is used as a preamp for active
loudspeakers in combination with a media player.
After connecting the Drachenfels to the mains grid connect the media player to
the line input located on the rear panel of the device by means of an RCA cable.
Now connect the active speakers to the pre-out of the Drachenfels by using an
RCA cable.
Drachenfels 45
EN